Skip to main content

For factories & industrial parks

MSTAR solutions applied to the factory site.

MSTAR Access controls the workers’ gate, shift attendance and contractor rights. MSTAR Park controls the workers’ bike park and the truck gate.

~25–30people/minute per speed-gate laneEstimate
< 1 sfrom card tap to unlockEstimate
~4–6 sper motorbike through an entry laneEstimate
3 checkson every vehicle: card, plate, photoDesign
Illustrative data

By area

MSTAR controls the security of every area of the factory.

Each product is responsible for its own areas. Select a product name to see its screens.

  • Workers’ gate Speed gates, card taps checked against the shift roster. Anti-passback: a card that went in must go out before it goes in again. MSTAR Access
  • Workers’ bike park Motorbikes enter with a card while cameras capture plate and photo. On the way out, card, plate and photo must match the entry. MSTAR Park
  • Truck gate Cameras read truck plates and keep entry and exit photos for traceability. MSTAR Park
  • Shop floor, restricted zones Only people granted that zone, within their shift hours. MSTAR Access
  • Warehouse Warehouse doors follow an access list; every opening is logged. MSTAR Access
  • Offices, visitors, contractors Contractors by contract, visitors by appointment; once expired, the gate stays shut. MSTAR Access

A day at the plant

Three shifts share one log.

  1. 05:30 Morning shift in: workers tap at the speed gates MSTAR Access
  2. 05:40 Bike park: motorbikes enter by card, cameras capture plates MSTAR Park
  3. 08:00 Maintenance contractor enters workshop B under contract MSTAR Access
  4. 10:00 Raw-material truck through the gate, plate read MSTAR Park
  5. 14:00 Shift change: morning shift rides out, afternoon shift rides in MSTAR Park
  6. 14:30 Morning shift timesheet ready from gate taps MSTAR Access
  7. 22:00 Night shift: only night-shift staff can enter the shop floor MSTAR Access

Shifts & contractors

The system blocks buddy punching and keeps contractors in their area.

MSTAR Access records taps by shift and computes attendance by period; contractors are granted access by area and by contract term.

Attendance by shift · todayMSTAR Access
Shift 106:00–14:00 1,838/1,850 99.4%
Shift 214:00–22:00 1,604/1,620 99.0%
Shift 322:00–06:00 968/980 98.8%
12 late arrivals · this month’s period not yet closed
Gate taps, 7 days × 24 hourspeaks at shift change 05:45 · 13:45 · 21:45
Mon Tue Wed Thu Fri Sat Sun 0h6h12h18h23h
Contractors today
Technician 01M&E company (sample) Area: Workshop B · press maintenance · contract until 15 Nov Contract valid
Technician 02Fire safety company (sample) Area: Finished-goods warehouse · contract until 30 Nov Contract valid
Technician 03Construction company (sample) Area: No access granted · contract expired Expired · stopped at the gate
Illustrative interface, sample data of a hypothetical plant Illustrative data

Deployment

MSTAR installs one gate at a time, and production never stops.

  1. 01 Site survey Measure people and vehicle flow at the gate and bike park at shift change
  2. 02 Pilot One gate or one vehicle lane; lane speed measured with the operations team
  3. 03 Card issue Import staff and shift lists; issue cards in bulk
  4. 04 Area by area Installed outside production hours; the old gate runs in parallel until handover
  5. 05 Operation Training for security and HR; software updates

FAQ

Factories often ask these questions.

Each speed-gate lane passes about 25–30 people a minute (estimate). The number of lanes follows the people per shift and the time allowed; the lane calculator on the MSTAR Access page works it out from each plant’s own figures.

Every vehicle pass has three things: the card, the plate read by the camera, the photo. On the way out, the guard’s screen shows the entry photo next to the exit photo; if they do not match, the barrier stays down and the guard is alerted.

No. The door controller decides on its own from the permissions already loaded, so the gate keeps working; the log syncs back once the network returns.

MSTAR Access provides attendance by shift and by period. How it reaches the HR or payroll software in use (file or connection) is agreed during the survey.

MSTAR Access has tools to set retention periods and destroy data. The factory is the party processing personal data under the 2025 Personal Data Protection Law and Decree 356/2025; the software is a supporting tool.

By the number of gate lanes, vehicle lanes and devices to install. The quotation is issued after the survey.

A pilot at one gate or one vehicle lane first. Then area by area outside production hours; the old gate runs in parallel until handover.

MSTAR engineers survey the plant on site.

MSTAR SYSTEMS engineers measure flow at the gate and bike park at shift change, then propose the lanes and devices for each area.

Or call our hotline 1234567890

Used only to contact you about your request, never shared with third parties.